Congratulations! Your Red Hat Linux 7.0 installation is now complete!
The installation program will prompt you to prepare your system for
reboot (see Figure 15-30). Don't forget
to remove any diskette in the floppy drive or CD in the CD-ROM drive. If
you did not install LILO, you'll need to use your boot disk now.
After your computer's normal power-up sequence has completed, you should
see LILO's GUI prompt, at which you can do any of the following things:
Press Enter -- Causes LILO's default boot entry
to be booted.
Select a boot label, followed by Enter -- Causes
LILO to boot the operating system corresponding to the boot label.
(Press ? at the LILO text boot:
for a list of valid boot labels.)
Do nothing -- After LILO's timeout period, (which, by default, is
five seconds) LILO will automatically boot the default boot entry.
Do whatever is appropriate to boot Red Hat Linux. You should see one or more
screens of messages scroll by. Eventually, you should see a
login: prompt or a GUI login screen (if
you installed the X Window System and chose to start X automatically).
Download
