Contents|Index|Previous|Next Options for code generation conventions    The following machine-independent options control the interface conventions used in code generation. Most of them have both positive and negative forms; the negative form of -ffoo would be -fno-foo. In the following options, only one of the forms is listed—the one which is not the default. You can figure out the other form by either removing ‘no-’or adding it. -fpcc-struct-return Return “short” struct and union values in memory like longer ones, rather than in registers. This convention is less efficient, although it has the advantage of allowing intercalls between GNU CC-compiled files and files compiled with other compilers. The precise convention for returning structures in memory depends on the target configuration macros. Short structures and unions are those whose size and alignment match that of some integer type.   -freg-struct-return Use the convention that struct and union values are returned in registers when possible. This is more efficient for small structures than ‘-fpcc-struct-return’. If you specify neither ‘-fpcc-struct-return’ nor its contrary ‘-freg-struct-return’, GNU CC defaults to whichever convention is standard for the target. If there is no standard convention, GNU CC defaults to ‘-fpcc-struct-return’, except on targets where GNU CC is the principal compiler. In those cases, we can choose the standard, and we chose the more efficient register return alternative.   -fshort-enums Allocate to an enum type only as many bytes as it needs for the declared range of possible values. Specifically, the enum type will be equivalent to the smallest integer type which has enough room.  -fshort-double Use the same size for double as for float.   -fshared-data Requests that the data and non-const variables of this compilation be shared data rather than private data. The distinction makes sense only on certain operating systems, where shared data is shared between processes running the same program, while private data exists in one copy per process.   -fno-common Allocate even uninitialized global variables in the bss section of the object file, rather than generating them as common blocks. This has the effect that if the same variable is declared (without extern) in two different compilations, you will get an error when you link them. The only reason this might be useful is if you wish to verify that the program will work on other systems which always work this way.   -fno-ident Ignore the #ident directive.   -fno-gnu-linker Do not output global initializations (such as C++ constructors and destructors) in the form used by the GNU linker (on systems where the GNU linker is the standard method of handling them). Use this option when you want to use a non-GNU linker, which also requires using the collect2 program to make sure the system linker includes constructors and destructors. (collect2 is included in the GNU CC distribution.) For systems which must use collect2, the compiler driver gcc is configured to do this automatically.   -finhibit-size-directive Don’t output a .size assembler directive, or anything else that would cause trouble if the function is split in the middle, and the two halves are placed at locations far apart in memory. This option is used when compiling ‘crtstuff.c’; you should not need to use it for anything else.   -fverbose-asm Put extra commentary information in the generated assembly code to make it more readable. This option is generally only of use to those who actually need to read the generated assembly code (perhaps while debugging the compiler itself). ‘-fverbose-asm’ is the default. ‘-fno-verbose-asm’ causes the extra information to be omitted and is useful when comparing two assembler files. -fvolatile Consider all memory references through pointers to be volatile.   -fvolatile-global Consider all memory references to extern and global data items to be volatile.   -fpic Generate position-independent code (PIC) suitable for use in a shared library, if supported for the target machine. Such code accesses all constant addresses through a global offset table (GOT). The dynamic loader resolves the GOT entries when the program starts (the dynamic loader is not part of GNU CC; it is part of the operating system). If the GOT size for the linked executable exceeds a machine-specific maximum size, you get an error message from the linker indicating that ‘-fpic’ does not work; in that case, recompile with ‘-fPIC’ instead. (These maximums are 16k on the m88k, 8k on the SPARC, and 32k on the m68k and RS/6000. The 386 has no such limit.) Position-independent code requires special support, and therefore works only on certain machines. For the 386, GNU CC supports PIC for System V but not for the Sun 386i. Code generated for the IBM RS/6000 is always position-independent. -fPIC If supported for the target machine, emit position-independent code, suitable for dynamic linking and avoiding any limit on the size of the global offset table. This option makes a difference on the m68k, m88k, and the SPARC. Position-independent code requires special support, and therefore works only on certain machines. -ffixed-reg Treat the register named reg as a fixed register; generated code should never refer to it (except perhaps as a stack pointer, frame pointer or in some other fixed role). reg must be the name of a register. The register names accepted are machine-specific and are defined in the macro, REGISTER_NAMES, in the machine description macro file. This flag does not have a negative form, because it specifies a three-way choice. -fcall-used-reg Treat the register named reg as an allocatable register that is clobbered by function calls. It may be allocated for temporaries or variables that do not live across a call. Functions compiled this way will not save and restore the register reg. Use of this flag for a register that has a fixed pervasive role in the machine’s execution model, such as the stack pointer or frame pointer, will produce disastrous results. This flag does not have a negative form, because it specifies a three-way choice. -fcall-saved-reg Treat the register named reg as an allocatable register saved by functions. It may be allocated even for temporaries or variables that live across a call. Functions compiled this way will save and restore the register reg if they use it. Use of this flag for a register that has a fixed pervasive role in the machine’s execution model, such as the stack pointer or frame pointer, will produce disastrous results. A different sort of disaster will result from the use of this flag for a register in which function values may be returned. This flag does not have a negative form, because it specifies a three-way choice. -fpack-struct Pack all structure members together without holes. Usually you would not want to use this option, since it makes the code suboptimal, and the offsets of structure members won’t agree with system libraries.   -fpack-struct Generate extra code to check each memory access. GNU CC will generate code that is suitable for a detector of bad memory accesses such as Checker. If you specify this option, you can not use the asm or __asm__ keywords. ‘’ You must also specify this option when you compile functions you call that have side effects. If you do not, you may get erroneous messages from the detector. Normally, you should compile all your code with this option. If you use functions from a library that have side-effects (such as read), you may not be able to recompile the library and specify this option. In that case, you can enable the -fprefix-function-name option, which requests GNU CC to encapsulate your code and make other functions look as if they were compiled with -fcheck-memory-usage. This is done by calling ‘stubs’ which are provided by the detector. If you cannot nd or build stubs for every function you call, you may have to specify -fcheck-memory-usage without -fprefix-function-name.   -fexceptions Enable exception handling. For some targets, this implies generation of frame unwind information for all functions, which can produce signi cant data size overhead, though it does not affect execution. This option is on by default for languages that support exception handling (such as C++), and off for those that don't (such as C). +e0 +e1 Control whether virtual function definitions in classes are used to generate code, or only to define interfaces for their callers. (C++ only). These options are provided for compatibility with cfront 1.x usage; the recommended alternative GNU C++ usage is in flux. See Declarations and definitions in one header. With +e0, virtual function definitions in classes are declared extern; the declaration is used only as an interface specification, not to generate code for the virtual functions (in this compilation). With +e1, G++ actually generates the code implementing virtual functions defined in the code, and makes them publicly visible. -funaligned-pointers Assume that all pointers contain unaligned addresses. On machines where unaligned memory accesses trap, this will result in much larger and slower code for all pointer dereferences, but the code will work even if addresses are unaligned.   -funaligned-struct-hack Always access structure fields using loads and stores of the declared size. This option is useful for code that dereferences pointers to unaligned structures, but only accesses fields that are themselves aligned. Without this option, gcc may try to use a memory access larger than the field. This might give an unaligned access fault on some hardware. This option makes some invalid code work at the expense of disabling some optimizations. It is strongly recommended that this option not be used.   -fprefix-function-name Request GNU CC to add a prefix to the symbols generated for function names. GNU CC adds a prefix to the names of functions defined as well as functions called. Code compiled with this option and code compiled without the option can’t be linked together, unless or stubs are used. If you compile the following code with -fprefix-function-name, extern void bar (int); void foo (int a) {    return bar (a + 5); } GNU CC will compile the code as if it was written: extern void prefix_bar (int); void prefix_foo (int a) {    return prefix_bar (a + 5); } This option is designed to be used with -fcheck-memory-usage.   -finstrument-functions Generate instrumentation calls for entry and exit to functions. Just after function entry and just before function exit, the following profiling functions will be called with the address of the current function and its call site. (On some platforms, __builtin_return_address does not work beyond the current function, so the call site information may not be available to the profiling functions otherwise.) void __cyg_profile_func_enter (void *this_fn, void *call_site); void __cyg_profile_func_exit (void *this_fn, void *call_site); The first argument is the address of the start of the current function, which may be looked up exactly in the symbol table. This instrumentation is also done for functions expanded inline in other functions. The profiling calls will indicate where, conceptually, the inline function is entered and exited. This means that addressable versions of such functions must be available. If all your uses of a function are expanded inline, this may mean an additional expansion of code size. If you use `extern inline' in your C code, an addressable version of such functions must be provided. (This is normally the case anyways, but if you get lucky and the optimizer always expands the functions inline, you might have gotten away without providing static copies.) A function may be given the attribute no_instrument_function, in which case this instrumentation will not be done. This can be used, for example, for the pro ling functions listed above, high-priority interrupt routines, and any functions from which the pro ling functions cannot safely be called (perhaps signal handlers, if the profiling routines generate output or allocate memory).   -fstack-check Generate code to verify that you do not go beyond the boundary of the stack. You should specify this ag if you are running in an environment with multiple threads, but only rarely need to specify it in a single-threaded environment since stack over ow is automatically detected on nearly all systems if there is only one stack. Top|Contents|Index|Previous|Next