Next Previous Contents 8. Troubleshooting If things do not work as expected, check bootability with a floppy disk. With /dev/hdb1 as your Linux-partition, your /etc/lilo.conf has the following entries: root=/dev/hdb1 boot=/dev/fd0 Run lilo with a diskette inserted. Now try to boot from the diskette. If your Linux on /dev/hdb1 can't be started, the NT OS loader will also fail to start it. If you see a lot of 01 01 01 01, your root-disk is not accessible. Check whether all your disks are known by the bios. If the floppy boots your Linux partition, you can peel of your boot-sector for the NT OS loader with: # dd if=/dev/fd0 of=/bootsect.lnx bs=512 count=1 You can keep this diskette as your rescue-diskette just in case your Windows NT installation breaks. Next Previous Contents