SRM Firmware Howto Prev Next 3. SRM Device Naming 3.1. The First Two Letter The following is based on the example device dkb1.2.3.4.5 taken from a Digital Server 3300 (Whitebox version of an AS800). Two letter port or class driver designator: DR: RAID set device DV: Floppy Drive EW: Ethernet port (TULIP, DEC 21040) EI: Ethernet port (Intel 82557 or 82559) PK: SCSI port (controller) DK: SCSI disk MK: SCSI tape PU: DSSI port DU: DSSI disk MU: DSSI tape JK: SCSI monitor (or robot) DQ: (E)IDE Device (disk or CD-ROM) 3.2. The Rest Of The Device Name b-> adapter ID (one letter adapter designator) 1->Device number (SCSI unit numbers are forced to 100x Node ID) 2->Bus Node ID 3->Channel Number 4->Channel Number (used for multi-channel devices) 5->Logical Slot number EISA: they correspond to the physical slot numbers (1-3) PCI: slot 5= SCSI controller on system backplane (DS3300) slot 6= On board VGA (DS3300) slot 7= PCI to EISA bridge chip (DS3300) slots 11 - 14 = Correspond to Physical PCI option slots: PCI11, PCI12, PCI13 and PCI14 (64bit) (DS3300) 6->Hose number: 0 PCI_0 (32bit PCI); 1 EISA (DS3300) Prev Home Next What is SRM?   The Raw Loader