In the previous section we spoke about listing the routing table and what
the basics of that listing meant. Well, luckily the output is very similar
to the syntax that you would use to implement that exact routing table on
your own.
ip route add 207.149.43.62 dev eth0 scope link
ip route add 207.149.43.0/24 dev eth0 proto kernel scope link src 207.149.43.62
ip route add 127.0.0.0/8 dev lo scope link
ip route add default via 207.149.43.1 dev eth0 |
As you can see the output and input are almost exact except for the adding
of the ip route add in front of the line.
Note: We are aware that the documentation on Routing with 2.2 is
sorely lacking. In fact, I think EVERYONE is aware of it. If you have any
experience in this please contact us at
poet@linuxports.com we
would like to get information you have to help further document this.
Download
