Download   Online Shop   Red Hat Network
Home  |  Products  |  Shop  |  Services  |  Training  |  Support

Next Previous Contents 3. ASSEMBLERS 3.1 GCC Inline Assembly The well-known GNU C/C++ Compiler (GCC), an optimizing 32-bit compiler at the heart of the GNU project, supports the x86 architecture quite well, and includes the ability to insert assembly code in C programs, in such a way that register allocation can be either specified or left to GCC. GCC works on most available platforms, notably Linux, *BSD, VSTa, OS/2, *DOS, Win*, etc. Where to find GCC The original GCC site is the GNU FTP site ftp://prep.ai.mit.edu/pub/gnu/gcc/ together with all released application software from the GNU project. Linux-configured and precompiled versions can be found in ftp://metalab.unc.edu/pub/Linux/GCC/ There are a lot of FTP mirrors of both sites, everywhere around the world, as well as CD-ROM copies. GCC development has split into two branches some time ago (GCC 2.8 and EGCS), but they merged back, and current GCC webpage is http://gcc.gnu.org. Sources adapted to your favorite OS and precompiled binaries should be found at your usual FTP sites. For most popular DOS port of GCC is named DJGPP, and can be found in directories of such name in FTP sites. See http://www.delorie.com/djgpp/. There are two Win32 GCC ports: cygwin and mingw There is also a port of GCC to OS/2 named EMX, that also works under DOS, and includes lots of unix-emulation library routines. See around the following site: ftp://ftp-os2.cdrom.com/pub/os2/emx09c/. Where to find docs for GCC Inline Asm The documentation of GCC includes documentation files in TeXinfo format. You can compile them with TeX and print then result, or convert them to .info, and browse them with emacs, or convert them to .html, or nearly whatever you like; convert (with the right tools) to whatever you like, or just read as is. The .info files are generally found on any good installation for GCC. The right section to look for is C Extensions::Extended Asm:: Section Invoking GCC::Submodel Options::i386 Options:: might help too. Particularly, it gives the i386 specific constraint names for registers: abcdSDB correspond to %eax, %ebx, %ecx, %edx, %esi, %edi and %ebp respectively (no letter for %esp). The DJGPP Games resource (not only for game hackers) had page specifically about assembly, but it's down. Its data have nonetheless been recovered on the DJGPP site, that contains a mine of other useful information: http://www.delorie.com/djgpp/doc/brennan/, and in the DJGPP Quick ASM Programming Guide. GCC depends on GAS for assembling, and follow its syntax (see below); do mind that inline asm needs percent characters to be quoted so they be passed to GAS. See the section about GAS below. Find lots of useful examples in the linux/include/asm-i386/ subdirectory of the sources for the Linux kernel. Invoking GCC to build proper inline assembly code Because assembly routines from the kernel headers (and most likely your own headers, if you try making your assembly programming as clean as it is in the linux kernel) are embedded in extern inline functions, GCC must be invoked with the -O flag (or -O2, -O3, etc), for these routines to be available. If not, your code may compile, but not link properly, since it will be looking for non-inlined extern functions in the libraries against which your program is being linked! Another way is to link against libraries that include fallback versions of the routines. Inline assembly can be disabled with -fno-asm, which will have the compiler die when using extended inline asm syntax, or else generate calls to an external function named asm() that the linker can't resolve. To counter such flag, -fasm restores treatment of the asm keyword. More generally, good compile flags for GCC on the x86 platform are gcc -O2 -fomit-frame-pointer -W -Wall -O2 is the good optimization level in most cases. Optimizing besides it takes longer, and yields code that is a lot larger, but only a bit faster; such overoptimization might be useful for tight loops only (if any), which you may be doing in assembly anyway. In cases when you need really strong compiler optimization for a few files, do consider using up to -O6. -fomit-frame-pointer allows generated code to skip the stupid frame pointer maintenance, which makes code smaller and faster, and frees a register for further optimizations. It precludes the easy use of debugging tools (gdb), but when you use these, you just don't care about size and speed anymore anyway. -W -Wall enables all warnings and helps you catch obvious stupid errors. You can add some CPU-specific -m486 or such flag so that GCC will produce code that is more adapted to your precise computer. Note that modern GCC has -mpentium and such flags (and PGCC has even more), whereas GCC 2.7.x and older versions do not. A good choice of CPU-specific flags should be in the Linux kernel. Check the TeXinfo documentation of your current GCC installation for more. -m386 will help optimize for size, hence also for speed on computers whose memory is tight and/or loaded, since big programs cause swap, which more than counters any "optimization" intended by the larger code. In such settings, it might be useful to stop using C, and use instead a language that favors code factorization, such as a functional language and/or FORTH, and use a bytecode- or wordcode- based implementation. Note that you can vary code generation flags from file to file, so performance-critical files will use maximum optimization, whereas other files will be optimized for size. To optimize even more, option -mregparm=2 and/or corresponding function attribute might help, but might pose lots of problems when linking to foreign code, including libc. There are ways to correctly declare foreign functions so the right call sequences be generated, or you might want to recompile the foreign libraries to use the same register-based calling convention... Note that you can add make these flags the default by editing file /usr/lib/gcc-lib/i486-linux/2.7.2.3/specs or wherever that is on your system (better not add -W -Wall there, though). The exact location of the GCC specs files on your system can be found by asking gcc -v. 3.2 GAS GAS is the GNU Assembler, that GCC relies upon. Where to find it Find it at the same place where you found GCC, in a package named binutils. The latest version is available from HJLu at ftp://ftp.varesearch.com/pub/support/hjl/binutils/. What is this AT&T syntax Because GAS was invented to support a 32-bit unix compiler, it uses standard AT&T syntax, which resembles a lot the syntax for standard m68k assemblers, and is standard in the UNIX world. This syntax is no worse, no better than the Intel syntax. It's just different. When you get used to it, you find it much more regular than the Intel syntax, though a bit boring. Here are the major caveats about GAS syntax: Register names are prefixed with %, so that registers are %eax, %dl and so on, instead of just eax, dl, etc. This makes it possible to include external C symbols directly in assembly source, without any risk of confusion, or any need for ugly underscore prefixes. The order of operands is source(s) first, and destination last, as opposed to the Intel convention of destination first and sources last. Hence, what in Intel syntax is mov ax,dx (move contents of register dx into register ax) will be in GAS syntax mov %dx, %ax. The operand length is specified as a suffix to the instruction name. The suffix is b for (8-bit) byte, w for (16-bit) word, and l for (32-bit) long. For instance, the correct syntax for the above instruction would have been movw %dx,%ax. However, gas does not require strict AT&T syntax, so the suffix is optional when length can be guessed from register operands, and else defaults to 32-bit (with a warning). Immediate operands are marked with a $ prefix, as in addl $5,%eax (add immediate long value 5 to register %eax). No prefix to an operand indicates it is a memory-address; hence movl $foo,%eax puts the address of variable foo in register %eax, but movl foo,%eax puts the contents of variable foo in register %eax. Indexing or indirection is done by enclosing the index register or indirection memory cell address in parentheses, as in testb $0x80,17(%ebp) (test the high bit of the byte value at offset 17 from the cell pointed to by %ebp). A program exists to help you convert programs from TASM syntax to AT&T syntax. See ftp://x2ftp.oulu.fi/pub/msdos/programming/convert/ta2asv08.zip. (Since the original x2ftp site is closing (no more?), use a mirror site). There also exists a program for the reverse conversion: http://www.multimania.com/placr/a2i.html. GAS has comprehensive documentation in TeXinfo format, which comes at least with the source distribution. Browse extracted .info pages with Emacs or whatever. There used to be a file named gas.doc or as.doc around the GAS source package, but it was merged into the TeXinfo docs. Of course, in case of doubt, the ultimate documentation is the sources themselves! A section that will particularly interest you is Machine Dependencies::i386-Dependent:: Again, the sources for Linux (the OS kernel) come in as excellent examples; see under linux/arch/i386/ the following files: kernel/*.S, boot/compressed/*.S, mathemu/*.S. If you are writing kind of a language, a thread package, etc., you might as well see how other languages ( OCaml, Gforth, etc.), or thread packages (QuickThreads, MIT pthreads, LinuxThreads, etc), or whatever, do it. Finally, just compiling a C program to assembly might show you the syntax for the kind of instructions you want. See section Do you need Assembly? above. 16-bit mode The current stable release of binutils (2.9.1.0.25) now fully supports 16-bit mode (registers and addressing) on i386 PCs. Still with its peculiar AT&T syntax, of course. Use .code16 and .code32 to switch between assembly modes. Also, a neat trick used by some (including the oskit authors) is to have GCC produce code for 16-bit real mode, using an inline assembly statement asm(".code16\n"). GCC will still emit only 32-bit addressing modes, but GAS will insert proper 32-bit prefixes for them. GASP GASP is the GAS Preprocessor. It adds macros and some nice syntax to GAS. GASP comes together with GAS in the GNU binutils archive. It works as a filter, much like cpp and the like. I have no idea on details, but it comes with its own texinfo documentation, so just browse them (in .info), print them, grok them. GAS with GASP looks like a regular macro-assembler to me. 3.3 NASM The Netwide Assembler project provides cool i386 assembler, written in C, that should be modular enough to eventually support all known syntaxes and object formats. Where to find NASM http://nasm.sourceforge.net Binary release on your usual metalab mirror in devel/lang/asm/. Should also be available as .rpm or .deb in your usual RedHat/Debian distributions' contrib. What it does The syntax is Intel-style. Fairly good macroprocessing support is integrated. Supported object file formats are bin, aout, coff, elf, as86, (DOS) obj, win32, (their own format) rdf. NASM can be used as a backend for the free LCC compiler (support files included). Unless you're using BCC as a 16-bit compiler (which is out of scope of this 32-bit HOWTO), you should definitely use NASM instead of say AS86 or MASM, because it is actively supported online, and runs on all platforms. Note: NASM also comes with a disassembler, NDISASM. Its hand-written parser makes it much faster than GAS, though of course, it doesn't support three bazillion different architectures. If you like Intel-style syntax, as opposed to GAS syntax, then it should be the assembler of choice... Note: There are converters between GAS AT&T and Intel assembler syntax, which perform conversion in both directions. 3.4 AS86 AS86 is a 80x86 assembler, both 16-bit and 32-bit, part of Bruce Evans' C Compiler (BCC). It has mostly Intel-syntax, though it differs slightly as for addressing modes. Where to get AS86 A completely outdated version of AS86 is distributed by HJLu just to compile the Linux kernel, in a package named bin86 (current version 0.4), available in any Linux GCC repository. But I advise no one to use it for anything else but compiling Linux. This version supports only a hacked minix object file format, which is not supported by the GNU binutils or anything, and it has a few bugs in 32-bit mode, so you really should better keep it only for compiling Linux. The most recent versions by Bruce Evans (bde@zeta.org.au) are published together with the FreeBSD distribution. Well, they were: I could not find the sources from distribution 2.1 on :( Hence, I put the sources at my place: http://www.tunes.org/~fare/files/asm/bcc-95.3.12.src.tgz The Linux/8086 (aka ELKS) project is somehow maintaining bcc (though I don't think they included the 32-bit patches). See around http://www.linux.org.uk/ELKS-Home/ (or http://www.elks.ecs.soton.ac.uk) and ftp://linux.mit.edu/pub/linux/ELKS/. I haven't followed these developments, and would appreciate a reader contributing on this topic. Among other things, these more recent versions, unlike HJLu's, supports Linux GNU a.out format, so you can link you code to Linux programs, and/or use the usual tools from the GNU binutils package to manipulate your data. This version can co-exist without any harm with the previous one (see according question below). BCC from 12 march 2025 and earlier version has a misfeature that makes all segment pushing/popping 16-bit, which is quite annoying when programming in 32-bit mode. I wrote a patch at a time when the TUNES Project used as86: http://www.tunes.org/~fare/files/asm/as86.bcc.patch.gz. Bruce Evans accepted this patch, but since as far as I know he hasn't published a new release of bcc, the ones to ask about integrating it (if not done yet) are the ELKS developers. How to invoke the assembler? Here's the GNU Makefile entry for using bcc to transform .s asm into both GNU a.out .o object and .l listing: %.o %.l: %.s bcc -3 -G -c -A-d -A-l -A$*.l -o $*.o $< Remove the %.l, -A-l, and -A$*.l, if you don't want any listing. If you want something else than GNU a.out, you can see the docs of bcc about the other supported formats, and/or use the objcopy utility from the GNU binutils package. Where to find docs The docs are what is included in the bcc package. I salvaged the man pages that used to be available from the FreeBSD site at http://www.tunes.org/~fare/files/asm/bcc-95.3.12.src.tgz. Maybe ELKS developers know better. When in doubt, the sources themselves are often a good docs: it's not very well commented, but the programming style is straightforward. You might try to see how as86 is used in ELKS or Tunes 0.0.0.25... What if I can't compile Linux anymore with this new version ? Linus is buried alive in mail, and since HJLu (official bin86 maintainer) chose to write hacks around an obsolete version of as86 instead of building clean code around the latest version, I don't think my patch for compiling Linux with a modern as86 has any chance to be accepted if resubmitted. Now, this shouldn't matter: just keep your as86 from the bin86 package in /usr/bin/, and let bcc install the good as86 as /usr/local/libexec/i386/bcc/as where it should be. You never need explicitly call this "good" as86, because bcc does everything right, including conversion to Linux a.out, when invoked with the right options; so assemble files exclusively with bcc as a frontend, not directly with as86. Since GAS now supports 16-bit code, and since H. Peter Anvin, well-known linux hacker, works on NASM, maybe Linux will get rid of AS86, anyway? Who knows! 3.5 OTHER ASSEMBLERS These are other non-regular options, in case the previous didn't satisfy you (why?), that I don't recommend in the usual (?) case, but that could be quite useful if the assembler must be integrated in the software you're designing (i.e. an OS or development environment). Win32Forth assembler Win32Forth is a free 32-bit ANS FORTH system that successfully runs under Win32s, Win95, Win/NT. It includes a free 32-bit assembler (either prefix or postfix syntax) integrated into the reflective FORTH language. Macro processing is done with the full power of the reflective language FORTH; however, the only supported input and output contexts is Win32For itself (no dumping of .obj file, but you could add that feature yourself, of course). Find it at ftp://ftp.forth.org/pub/Forth/Compilers/native/windows/Win32For/. TDASM The Table Driven Assembler (TDASM) is a free portable cross assembler for any kind of assembly language. It should be possible to use it as a compiler to any target microprocessor using a table that defines the compilation process. It is available from http://www.penguin.cz/~niki/tdasm/. Terse Terse is a programming tool that provides THE most compact assembler syntax for the x86 family! However, it is evil proprietary software. It is said that there was a project for a free clone somewhere, that was abandoned after worthless pretenses that the syntax would be owned by the original author. Thus, if you're looking for a nifty programming project related to assembly hacking, I invite you to develop a terse-syntax frontend to NASM, if you like that syntax. As an interesting historic remark, on comp.compilers, 2025/07/11 19:36:51, the moderator wrote: "There's no reason that assemblers have to have awful syntax. About 30 years ago I used Niklaus Wirth's PL360, which was basically a S/360 assembler with Algol syntax and a a little syntactic sugar like while loops that turned into the obvious branches. It really was an assembler, e.g., you had to write out your expressions with explicit assignments of values to registers, but it was nice. Wirth used it to write Algol W, a small fast Algol subset, which was a predecessor to Pascal. As is so often the case, Algol W was a significant improvement over many of its successors. -John" HLA HLA is a High Level Assembly language. It uses a high level language like syntax (similar to Pascal, C/C++, and other HLLs) for variable declarations, procedure declarations, and procedure calls. It uses a modified assembly language syntax for the standard machine instructions. It also provides several high level language style control structures (if, while, repeat..until, etc.) that help you write much more readable code. HLA is free, but runs only under Win32. You need MASM and a 32-bit version of MS-link, because HLA produces MASM code and uses MASM for final assembling and linking. However it comes with m2t (MASM to TASM) post-processor program that converts the HLA MASM output to a form that will compile under TASM. Unfortunately, NASM is not supported. TALC TALC is another free MASM/Win32 based compiler (however it supports ELF output, does it?). TAL stands for Typed Assembly Language. It extends traditional untyped assembly languages with typing annotations, memory management primitives, and a sound set of typing rules, to guarantee the memory safety, control flow safety,and type safety of TAL programs. Moreover, the typing constructs are expressive enough to encode most source language programming features including records and structures, arrays, higher-order and polymorphic functions, exceptions, abstract data types, subtyping, and modules. Just as importantly, TAL is flexible enough to admit many low-level compiler optimizations. Consequently, TAL is an ideal target platform for type-directed compilers that want to produce verifiably safe code for use in secure mobile code applications or extensible operating system kernels. Non-free and/or Non-32bit x86 assemblers. You may find more about them, together with the basics of x86 assembly programming, in Raymond Moon's x86 assembly FAQ. Note that all DOS-based assemblers should work inside the Linux DOS Emulator, as well as other similar emulators, so that if you already own one, you can still use it inside a real OS. Recent DOS-based assemblers also support COFF and/or other object file formats that are supported by the GNU BFD library, so that you can use them together with your free 32-bit tools, perhaps using GNU objcopy (part of the binutils) as a conversion filter. Next Previous Contents

	Search for:  on  redhat.com Linux Sites The Marketplace Downloads Support Solutions   Powered by Google Products & Services   :   Download   :   Support   :   Training   :   Partners & Programs © 2000 Red Hat, Inc. All right reserved.       About Red Hat   :   Legal statement   :   Privacy statement   :   Y2K statement   :   Contact Red Hat